601 Jobs in Dadra & Nagar Haveli - Page 18

Looking for Production Executive at reputed FMCG industry in Silvassa. Qual: BSc in Chemistry Exp: Min 1Yrs Salary: As per interview Interested call Ms Shiva on 9408863300 Required Candidate profile Candidates must have experience in Liquid Detergent or Personal Care product company.

We are looking for QC Chemist for Silvassa Qual: BSc/B.Pharma Exp: Min 1Yrs Salary: As per experience Interested call Ms. Shiva on +91 9408863300

Immediately hiring for reputed Pharma Industry @Silvassa Post: Microbiologist Qual: BSc/MSc in Micro Exp: Min 1Yrs Salary: As per candidates Ms. Shiva 9408863300 hr.asst@creativehr.in

1. Quality Management Systems: Implementing, monitoring, and maintaining Quality Management Systems to ensure compliance with CGMP/regulatory guidelines. 2. Documentation: Reviewing and approving technical and quality documents. Required Candidate profile Should be minimum Post Graduation in Science having the work experience of about 6-7 years of experienced in FMCG company or in pharma industry.

Developing and Implementing QA Systems and Procedures: Responsible for establishing and maintaining quality assurance systems, policies, and procedures. This includes creating SOPs (Standard Operating Procedures), work instructions. Required Candidate profile Strong knowledge of cGMP and relevant regulatory requirements: This includes understanding manufacturing processes, quality control procedures, and validation requirements.

Post: PPC Executive/Sr Executive Qual: Any Graduates/Degree Exp: Min 3Yrs Salary: 35 to 55K Female & Male candidates both preferred. Interested Call Ms. Priyanka on 9157895300

Post: Production Supervisor Education : Diploma in Mechanical/Plastics Experience: - Min 2Yrs Salary: - Upto 4.5 Lacs PA Location:- Daman Gender : - Female candidates preferred Only Interested candidate Call on +91 9157895300 Required Candidate profile Thanks Ms. Priyanka +91 9157895300 (Call & Whatsapp) hr@creativehr.in Creative HR Services

Any Graduates with min 2Yrs experience in MIS. Good knowledge about MS Office. Strong excel knowledge. Interested call Mr Shiva on 9408863300

Post: Manager - Tool Room Education: - DPMT/Any Degree Experience: - Min 7Yrs Salary: - As per candidates Gender : - Male candidates can apply. Candidates must have experience in Tool Room with managerial role. Call Us on +91 9375434300

Immediately hiring for reputed Industry @Sarigam, Near Vapi Post: Project Engineer - Electrical Qual: Diploma/BE in Electrical Exp: Min 5Yrs Salary: Upto 7 Lacs PA Call Now on 9408863300

Education : Graduates+ADIS/PDIS Location:- Dadra Call on +91 9375434300 Required Candidate profile Thanks Mr. KD +91 9375434300 (Call & Whatsapp) kd@creativehr.in Creative HR Services Visit Us on: SA-05, Solitaire Business Centre, GIDC Char Rasta, Vapi.

Quality Assurance professional for a ropes and nets manufacturing company.Responsibilities include monitoring production quality, conducting inspections, ensuring compliance with industry standards, and implementing corrective actions.

Knowledge about 7 QC Tools, Customer Complaint Handling, Customer specific requirement & 8D, core tools APQP /PPAP /FMEA /SPC/MSA, Layout Inspection, Product, Process Audit, System Audit, Calibration, SAP. IATF, ISO Must

The Production Supervisor will be responsible for overseeing day-to-day production activities, ensuring smooth operations, maintaining quality standards, and meeting production targets.

With more than 45,000 employees and partners worldwide, the Customer Experience and Success (CE&S) organization is on a mission to empower customers to accelerate business value through differentiated customer experiences that leverage Microsoft’s products and services, ignited by our people and culture. We drive cross-company alignment and execution, ensuring that we consistently exceed customers’ expectations in every interaction, whether in-product, digital, or human-centered. CE&S is responsible for all up services across the company, including consulting, customer success, and support across Microsoft’s portfolio of solutions and products. Join CE&S and help us accelerate AI transformation for our customers and the world. Within CE&S, the Customer Service & Support (CSS) organization builds trust and confidence for every person and organization through delivering a seamless support experience. In CSS, we are powered by Microsoft’s AI technology to help consumers, businesses, partners, and more, resolve their issues quickly and securely, helping prevent future problems from occurring and achieving more from their Microsoft investment. As a Senior Support Engineering Manager, you will lead a team of support engineering roles with deep product knowledge that resolve customer technical issues. You will manage the customer relationship from a support standpoint, enable your team to deliver a great customer experience and drive Microsoft Product Improvement. This opportunity will allow you to accelerate your career growth and hone your customer relationship management skills. You will develop deep technology industry knowledge and become adept at building and leading diverse teams. This role is flexible in that you can work up to 50% from home. Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond. Responsibilities People Management: You lead a team of product experts that solve complex customer technical issues by practicing leadership principles, driving accountability and attracting/ retaining great people. Response and Resolution: You manage the customer relationship with regards to Technical Support and act as an escalation point for Support Engineers to remove roadblocks. Readiness: You ensure your team has the technical skills required to provide a great customer experience. Product/Process Improvement: You ensure your team understands the product feedback cycle and participate in case triage meetings. You identify the right resources to implement automation or tools. Business Integration: You establish engagement strategy to promote effective collaboration across other teams and organizations to enable a great customer experience. Qualifications Required Qualifications: 5+ years of operational excellence, delivery management, account management, sales, or vendor management experience OR a Bachelor's degree in Computer Science, Information Technology (IT), or related field AND 3+ years operational excellence, delivery management, account management, sales, or vendor management experience OR equivalent experience 1+ year(s) of people management experience Language Qualification English Language: fluent in reading, writing and speaking. Ability to meet Microsoft, customer and / or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud Background Check upon hire / transfer and every two years thereafter. Microsoft is an equal opportunity employer. Consistent with applicable law, all qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations. Show more Show less

With more than 45,000 employees and partners worldwide, the Customer Experience and Success (CE&S) organization is on a mission to empower customers to accelerate business value through differentiated customer experiences that leverage Microsoft’s products and services, ignited by our people and culture. We drive cross-company alignment and execution, ensuring that we consistently exceed customers’ expectations in every interaction, whether in-product, digital, or human-centered. CE&S is responsible for all up services across the company, including consulting, customer success, and support across Microsoft’s portfolio of solutions and products. Join CE&S and help us accelerate AI transformation for our customers and the world. Within CE&S, the Customer Service & Support (CSS) organization builds trust and confidence for every person and organization through delivering a seamless support experience. In CSS, we are powered by Microsoft’s AI technology to help consumers, businesses, partners, and more, resolve their issues quickly and securely, helping prevent future problems from occurring and achieving more from their Microsoft investment. In the Customer Service & Support (CSS) team we are looking for people with a passion for delivering customer success. As a Technical Support Engineer, you will own, troubleshoot and solve customer technical issues. This opportunity will allow you to accelerate your career growth, hone your problem-solving, collaboration and research skills, and develop your technical proficiency. This role is flexible in that you can work up to 50% from home. Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond. Responsibilities Response and Resolution: You own, investigate and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. Readiness: You lead or participate in building communities with peer delivery roles and, where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. Product/Process Improvement: You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Qualifications Required Qualifications: Bachelor's degree in Computer Science, Information Technology (IT), or related field AND 1+ years of technical support, technical consulting experience, or information technology experience OR 3+ years of technical support, technical consulting experience, or information technology experience. OR equivalent experience Language Qualification English Language: fluent in reading, writing and speaking. Ability to meet Microsoft, customer and / or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud Background Check upon hire / transfer and every two years thereafter. Microsoft is an equal opportunity employer. Consistent with applicable law, all qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations. Show more Show less

Role Purpose: Key Accountabilities: Preferred Experience and Qualification: Role Title : Supplier Quality Assurance Engineer Role Purpose : Managing Supplier Quality. Working with (Reporting Relationship) Head Quality Assurance (OC) (Key Responsibilities) (Indicative -The role is bigger) As a Supplier Quality Engineer at our STL facility, you will develop, implement, and maintain quality improvement plans for direct product materials, production materials, and third-party suppliers. Your primary focus will be resolving significant quality issues and enhancing the quality of parts supplied to STL or directly to STL customers. In this role, you will conduct supplier audits to support supplier selection and management processes. You will also collaborate with the Supply Chain Management (SCM) team to create integration plans for new suppliers, monitor and evaluate supplier performance using quality metrics, and contribute to long-term strategies that ensure quality compliance and help meet financial and performance targets. Work closely with Commodity and Category Buyers to analyze supplier assessments and develop supplier capabilities to meet STL s quality and performance standards. Assess supplier capacity and process capabilities. Where deficiencies are found, coordinate with suppliers to develop and manage improvement plans. Develop and implement audit plans for strategic, new, third-party, and low-performing suppliers. Conduct audits that include Quality System Risk Assessments and Sustainability Surveys in alignment with STL procedures, guidelines, and scheduled plans. Ensure timely follow-up and closure of identified corrective actions. Oversee product inspection and testing at the supplier site with reference to drawings, Bill of Materials (BOM), and cosmetic specifications to ensure conformity prior to shipment to STL or direct delivery to STL customers. Ensure all inspection results are accurate, timely, and reliable. During sample audits, evaluate the supplier s process to confirm that it is correctly documented and implemented in accordance with approved procedures. Drive continuous improvement by incorporating best practices into both new systems and existing system enhancements. Provide retraining and support across various departments based on company needs. Prepare Product Discrepancy Reports (PDR) as needed. Promptly notify your immediate superior of any deviations from established quality standards and ensure corrective actions are taken. Perform additional tasks and responsibilities as required. What we are looking for in you (Skills, Knowledge, Special Attributes, Mobility) Create and implement audit plans for strategic, new, third party and low-performing suppliers and complete audits with suppliers including quality system Risk Assessments and Sustainability Surveys consistent with STL procedures, guidelines, and scheduled plans. Follow-up with all identified corrective actions in a timely fashion. Excellent Knowledge on Optical Interconnect product. Excellent experience in the PPAP. Excellent knowledge of Molding with Engineering plastic, Sheet metal fabrication, Powder coating & Plating SAP knowledge. Six Sigma certification Experience working on Minitab. Certified Quality Engineer, or Certified Quality Auditor. Working knowledge and application of ISO Quality Standards Intimate familiarity with ISO9000/TL9000 Quality Systems with implementation or other applicable professional experience. Working knowledge of basic and advanced Quality tools such as; 7QC, FMEA, SPC, FMEA, Control Plans, Root Cause Analysis, Poke Yoke, Kaizen Lean Manufacturing etc. Experience with developing/documenting procedures. Use of Quality Engineering methods in inspection. Ability to coordinate with teams across departments and/or cross functional personnel. Ability to articulate (verbally & in writing), defend and negotiate Quality expectations with internal and external customers. Ability to drive technical and cultural changes where required. Location Dadra ( Needs frequent travel to suppliers) Experience & Education Minimum Qualifications & Critical Exposure to Perform the Job at the Optimum Level Bachelors Degree in Engineering or a related degree with a minimum of 4-6 years of experience working with supplier quality improvement, supplier development, quality audits and Inspections in a manufacturing-related environment. Experience in using Lean Six Sigma tools.

Position Title AVP - Quality Position Summary The Quality Head will be responsible for establishing, implementing, and maintaining robust quality systems to ensure the highest standards in conductor manufacturing. This role involves overseeing quality control, assurance, and continuous improvement processes, ensuring compliance with customer specifications, industry standards, and regulatory requirements. Key Accountabilities / Responsibilities Quality Management System (QMS): Develop, implement, and maintain the Quality Management System (QMS) in line with ISO and other relevant standards. Conduct regular audits to ensure compliance with QMS and drive improvements where necessary. Quality Control and Assurance: Oversee the entire quality control process, from raw material inspection to finished product evaluation. Ensure that all products meet customer specifications and industry standards. Investigate and resolve quality issues, including root cause analysis and corrective actions. Standards Compliance: Ensure adherence to national and international standards such as ISO, IEC, and other applicable regulatory requirements. Stay updated with industry standards and integrate them into the production process. Process Improvement: Implement quality improvement programs such as Lean, Six Sigma, or Total Quality Management (TQM). Identify opportunities for process optimization to reduce defects, improve efficiency, and enhance product consistency. Competencies Behavioural - Achievement Orientation Behavioural - Altrocentric Leadership Behavioural - Analytical Decision Making Behavioural - Customer Service Orientation Functional - Financial Functional - Operational Functional - People Functional - Strategic About Us About Sterlite Sterlite is India s leading integrated power transmission developer and solutions provider, focused on addressing complex challenges in the sector by tackling the key constraints of time, space and capital. We believe that electricity access transforms societies and delivers long-lasting social impact. Sterlite is uniquely positioned to solve the toughest challenges of energy delivery. We are guided by our core purpose of empowering humanity by addressing the toughest challenges of energy delivery. Our four core values form the pillars of our organization: Respect: Every one counts Social Impact: We work to improve lives Fun: Thank God it s Monday! Innovation: A new way today Sterlite is a leading global developer of power transmission infrastructure with projects of over 10,000 circuit km and 15,000 MVA in India and Brazil. With an industry-leading portfolio of power conductors, EHV cables and OPGW, Sterlite also offers solutions for upgrading, uprating and strengthening existing networks. The Company has set new benchmarks in the industry by use of cutting-edge technologies and innovative financing. For more details, visit: www.sterlitepower.com

Manage day-to-day production activities for rubber and silicone molding (LSR, HCR, or thermoset rubber). Monitor machine efficiency Supervise operations on injection/compression/transfer molding presses for rubber or silicone products.

Detailed Job Description Production and Demand & Supply Planning (Shift Wise/Daily/Weekly/Monthly) Ensuring that customer needs are met in a way to improve customer satisfaction level and handling customer complaints (if any) (Supplies, Services, Continuous Improvement, Communications, etc.) Building new processes / procedures. Simplifying manufacturing through work study, line balancing and promoting automation Prioritizing and accommodating change requests in a prioritized manner Ensure Adherence to Quality assurance processes by evaluating quality of inputs, processes and outputs. Improve the topline by ensuring the RFD Adherence and Dispatch Adherence as per target and using forward thinking to identify the possible bottlenecks to achieve the same and hence, initiate the necessary action to de-bottleneck the process. Establish a system to reduce the dependency on the workforce and set up a semi-automatic process or low cost automation to make the process more agile and robust. Exhibit Safety Leadership by adhering to safety standards, enhancing behavioral safety, machine safety, process safety, ergonomics safety, industrial hygiene Establish a System related to EHS (Environment Health & Safety) to ensure that risks are assessed, the workplace remains safe and healthy for manpower . Ensure protection of Environment by adopting environmentally conscious practices. Ensure the adherence of plant statutory compliance norms Ensure the smooth batch processing of new products at Plant through the existing resources by developing process performance & process development. People Development in different segments to ensure multi skill availability of the workforce. People (White Collar) Development and Management & Middle Level Leadership development. (Talent Management, Planning Individual Development, Upskilling, etc.) Managing performance of Production employees (Staff & Workers) Budgeting, Monitor & Control on Conversion and Operational Cost Management and achieve a new benchmark. Inventory control to ensure the minimal variance in ERP Vs Physical Stock. Development of Local Vendor to find alternate solutions related to manufacturing and having cost effective solutions. Skills: manufacturing,vendor development,powder coating,manufacturing automation,ehs compliance,batch processing,customer relationship management,budgeting,plant factory,process improvement,inventory management,demand & supply planning,line balance,people development,operational cost management,safety leadership,talent management,production planning,inventory control,mig welding,customer satisfaction,production activity control,agile,quality assurance,metal fabrication Show more Show less

Job Purpose To assess the quality of Billets from time to time to ensure right quality received from the supplier. To develop a quality culture through continual improvements and team working. Analyze reasons for external and internal and initiate, monitor and implement corrective actions, to prevent recurrence Ensure guidelines are followed in the case of products where special testing is required to satisfy the customer Liaison with external agencies for third party inspections. Initiate action plans to reduce customer complaints, sales return and internal rejection. Identify and train employees on any special needs identified for effective working of the systems to develop the right competencies. Monitoring of the KPI’s on monthly basis & initiating the plans to achieve to meet the requirements. Visit to Customers for understanding customer perceptions Understand Customer process and applications. Provide inputs for developing customer specific practices. Develop/modify products based on customer inputs. Lead Quality control subcommittee, Deployment of QC tools. Implementation of Quality control projects. Carry out RCA (5 why, fish bone, 8D) Have an advanced understanding of product, process and system standards and requirements relevant to aluminium extrusion Show more Show less

We are hiring Maintenance Engineer Mechanical Engineer

We are hiring quality control Engineer Mechanical Engineer

Role & responsibilities Should have knowledge of SLD drawing Should be able to read the Electrical and Mechanical Drawing. Should be able to understand of P&ID and isometric Drawing. Basic knowledge of AutoCAD Hands on experience of Budget preparation of project work. Hands on experience on Project planning, handling and management. Should have able to manage material stock and record for consumption sheet preparation. Understand Companys Health & Safety Policy and follow all company HSE procedures. Should able to deliver the assigned task on time. Finalization of technical specification of machine Hands on experience on documentation like OQ,IQ,URS etc. Hands on experience of execution and commissioning of pharma machineries and utility Equipments Should have knowledge of HVAC system and clean room applications Should have knowledge of CGMP and revised schedule M Hand on experience of solid oral facility (Nutraceutical experience also be considered)Hands on Experience of WTP/utilities (Boiler, Chiller, WTP, Compressor, ETP, STP) piping, installation and commissioning. Hands on experience of vendor co ordination Should be able to present Project status/ reports and Daily work status/report. Manpower handling Hands on experience on Facility qualification, HVAC and Compressed Air Validation Provide technical input as required to ensure projects progress in line with their scope requirements. Support the development and completion of documentation in relation to purchasing, planning, implementation, commissioning and validation activities in relation to the above. Be responsible for Supervision of 3rd party contractors and internal service providers Be responsible for tracking and reporting project delivery, ensuring projects are delivered on time and within budget. Ensure training has been Given before undertaking specific duties and that all training is recorded in training records. Preferred candidate profile 5-7 years of hands-on experience in project engineering or project management roles within OSD pharmaceutical manufacturing . In-depth knowledge of OSD manufacturing processes , equipment, utilities, and facility layouts. Familiarity with HVAC , cleanroom classification, and GMP /cGMP requirements. Hands-on experience with equipment installation, commissioning, and qualification (IQ/OQ/PQ).

Role description Role Purpose: Key Accountabilities: Preferred Experience and Qualification: Show more Show less